External IP68 24 x Fibre Splice Dome (48 Fibres With Optional Trays)

External IP68 rated FTTx moulded plastic dome enclosure is suitable for protecting up to 48 fibre splice terminations in branch applications. Supplied as standard with 2 x 12 position fibre splice tray and can accept an additional two trays if required. Trays are hinged to allow access to other trays and open beyond 90 degrees enabling unencumbered access to installed fibres. Resistant to vibration, with a water-tight seal suitable for direct burial. Can also be mounted on walls, or poles. 

No specialist tools are required to enter the enclosure which can be locked to prevent unauthorised access. With three round cable entry points in the base and one oval cable entry point. Once opened the cable entry points are sealed using supplied heat shrink tubing. The oval port accepts two cables with a diameter of up to 21mm or can be used as a loop through cable entry. The joints internal dimensions allow safe management of unused tubes without affecting attenuation. With standard individual cable strength retention at each cable entry point.

Compliant with IEC standards covering water immersion, UV resistance, temperature cycling, salt mist, fungus resistance, chemical resistance and re-entry testing. An excellent temperature range of -40 degrees to +65 degrees for extreme weather conditions and long-term reliability.

Features:

• IP68 rating with water-tight seal suitable for direct burial.
• Wall or Pole mountable.
• With 2 x 12 position fibre splice trays (24 Fibre) as standard.
• Will accept a further 2 x 12 position trays (48 fibre total).
• 3 x Round cable entry points in base.
• 1 x oval cable entry point.
• Lockable to prevent unauthorised access.
• Dimensions: 280 x 200 x 90mm.